Cadillac deville 2000 ユーザーズマニュアル

6-68

CAUTION:

A safety belt that isn’t properly routed through
the seat cushion or is twisted won’t provide the
protection needed in a crash. If the safety belt
hasn’t been routed through the seat cushion at
all, it won’t be there to work for the next
passenger. The person sitting in that position
could be badly injured. After reinstalling the seat
cushion, always check to be sure that the safety
belts are properly routed and are not twisted.

1. Buckle the center passenger position safety belt, then

route the safety belts through the proper slots in the
seat cushion. Don’t let the safety belts get twisted.

2. Slide the rear of the cushion up and under the

seatback so the rear

locating guides hook into the

wire loops on the back frame.

3. With the seat cushion lowered, push rearward and

then press down on the seat cushion until the spring
locks on both ends engage.

4. Check to make sure the safety belts are properly

routed and that no portion of any safety belt is
trapped under the seat. Also make sure the seat
cushion is secured.

Rear Underseat Bussed Electrical Center

The rear BEC is located under the rear seat on the
driver’s side. The rear seat cushion must be removed to
access the BEC. See “Removing the Rear Seat Cushion”
in the Index.