Korg Ax3000b ユーザーズマニュアル
30
11. SYNTH
This models a bass synth. An algorithm unique to ToneWorks is used to simulate
an analog synthesizer sound with a smoothly tracking envelope filter.
an analog synthesizer sound with a smoothly tracking envelope filter.
HINT: This effect is designed for single-note playing. The sound may be muddy if
you play a chord.
you play a chord.
HINT: The sound may be distorted depending on your settings and on how this
effect is combined with other effects. If so, you should lower the DRIVE/AMP [VOL-
UME] or the [PROG LVL] settings.
effect is combined with other effects. If so, you should lower the DRIVE/AMP [VOL-
UME] or the [PROG LVL] settings.
HINT: If you want to produce the overtone structure typical of a synthesizer, it is
sometimes best to turn off the CABINET model.
sometimes best to turn off the CABINET model.
D. MOD (M
ODULATION
)
EFFECTS
Here you can select one of 11 modulation-type effects.
*: This indicates a parameter that you can control from the expression pedal.
1. CLASSIC CHORUS (CL CHORS)
This models a famous chorus unit with two modes; chorus and vibrato.
[1] “DPTH/POL” -10.0–10.0
Adjusts the depth of the envelope filter (left
half is negative motion, right half is positive
motion).
half is negative motion, right half is positive
motion).
[2] “ATTACK”
0.0–10.0
* Adjusts the attack of the envelope filter.
[3] “WAVE”
0.0–10.0
* Synth waveform.
The available choices model a variety from
an ordinary sawtooth waveform to a sawtooth
waveform one octave below.
an ordinary sawtooth waveform to a sawtooth
waveform one octave below.
[4] “RESO”
0.0–10.0
* Adjusts the resonance of the envelope filter.
[5] “MIX”
0.0–10.0
* Adjusts the mix balance between the original
sound and the synth sound.
[1] “DEPTH”
0.0–10.0
* Adjusts the modulation depth.
[2] “SPEED”
0.1–10.0[Hz]
* Adjusts the modulation speed.
[3] “MANUAL”
1.0–10.0
* Adjusts the center frequency of the sweep.
If DEPTH is set to 10, MANUAL will not func-
tion.
tion.
[5] “MODE”
Selects the output mode.
1:
Mono output.
2:
Stereo mode in which the effect is panned
right, and the dry sound panned left.
right, and the dry sound panned left.
3:
Vibrato mode, in which only the effected
sound is output. Setting MANUAL to 10 will
minimize the delay of the output.
sound is output. Setting MANUAL to 10 will
minimize the delay of the output.