Cissell cissiman38 ユーザーズマニュアル

10A Steam valve linkage not

properly adjusted

10B Steam time set too short

11

Defective steam timer

12A Defective Air timer

12B Defective blower relay

12C Defective automatic relay

13A Damper control rod

disconnected or broken

Adjust linkage according to
adjustment instructions.  Tighten
all set screws and lock nuts.
Set steam timer for longer time.
Tighten knob set screw if
necessary.
Check timer operation.  See if
timer switch operates properly.  If
operation is not correct, replace
the timer.
Check timer operation.  See if
timer switch operates properly.  If
operation is not correct, replace
the timer.
Check to see if relay operates
properly on rated current.  If
contacts are stuck or welded shut,
or relay does not operate properly,
replace it.
Check relay operation to see that
contacts alternate from closed to
open.  Also, be sure that relay will
operate on rated current.  If not,
replace relay.
Check to see that the damper
opens and closes when the control
knob is lowered and raised.  If not,
repair or replace damper control
rod.

(10) Inadequate steam flow

(11) Blower motor will

(12) Blower motor won’t stop

(13) Blower motor starts, but

form will not change