Cadillac seville 2002 ユーザーズマニュアル

Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See “Recommended
Fluids and Lubricants” in the Index.

If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross

-

hatched area on 

the dipstick.

1. Pull out the dipstick.

2. Using a long

-

neck funnel, add enough fluid at the

dipstick hole to bring it to the proper level.

It doesn’t take much fluid, generally less than
one pint (0.5 L). Don’t overfill.

R

R

3. After adding fluid, recheck the fluid level as

described under “How to Check.”

4. When the correct fluid level is obtained, push 

the dipstick back in all the way and turn the 
handle clockwise. Reinstall the engine air
cleaner/filter assembly.

Once the transaxle fluid has been changed, the transaxle
fluid change indicator must be reset. Use the following
steps to reset the indicator:

1. Press the INFO button on the Driver Information

Center (DIC) until TRANS FLUID LIFE 
is displayed.

2. Press and hold the INFO RESET button until 100%

is displayed.

The indicator is now reset. The percentage of transaxle
fluid life remaining may be checked at any time by
pressing the INFO button several times until the
TRANS FLUID LIFE message appears.