Cadillac seville 2002 ユーザーズマニュアル

You can control the windshield wipers by moving 
the lever with the wiper symbol on it. This lever is
located on the right side of your steering column. 
For information on wiper

-

activated headlamp operation,

refer to “Wiper

-

Activated Headlamps” in the Index.

The following is a list of the available settings:

LO or HI: Move the lever up to LO for steady wiping
at a slow speed. Move the lever higher to HI for steady
wiping at a high speed.

INT (Delay): Move the lever up to the INT position,
then turn the INT ADJ band, which is located on the
lever, to adjust the delay time. The higher you turn 
the INT ADJ band, the more frequent the wipers 
will operate.

OFF: Lower the lever to its resting position (OFF) to
turn off the wipers.

MIST: Pull the lever down once and release it for a
single wipe cycle. For more cycles, hold the lever down
in the MIST position longer.

To wash the windshield, press the button located at 
the tip of the lever.

Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If the blades do become
damaged, get new blades or blade inserts.

Heavy snow or ice can overload the wiper motor. 
A circuit breaker will stop the motor until it cools. 
Clear away snow or ice to prevent an overload.