Honeywell 4500 ユーザーズマニュアル

 

5 

The phone access feature of the Honeywell security system provides a 
number of capabilities to the user: 
•  To adjust the ARMED AWAY set back temperature of the 4500 

thermostats over any phone. 

•  To turn off the set back function for a single ARMED AWAY 

period, or turn it on again if necessary. 

•  To control two 4500 thermostats in a single installation. 

A Thermostat Mode voice menu can be activated after accessing the 
security system by phone. 

1.  Obtain access to your security system by phone according to the 

instructions for phone access provided with your security system.  
You will need to enter the 2-digit phone code provided by your 
installer, and your 4-digit user code when you are calling from 
outside, or whenever prompted by the system. 

2.  You will now hear the announcement of the security system 

status followed by the ambient room temperature (if installer 
has programmed this particular option). 

3.  Wait until the security system completes the status announce-

ments.  When prompted by the system, press: 

 The security system phone access module will announce all words 
denoted by quotation marks and italicized as follows: 

•  “THERMOSTAT MODE,” followed by whether “SET-BACK” is 

“ON” or “OFF”, and whether the 4500 thermostat is set for 
“HEAT MODE” or “COOL MODE.”   

•  The temperature setting of the 4500 thermostat that is in effect 

when the security system is ARMED AWAY. 

A menu of thermostat related end-user commands will be annunciated.  
The following sections: Adjusting the Set-Back Temperature of the 
4500 thermostat, Turning the Set-Back On and Off, Using Two 
4500 thermostats With Your Security System, and Exiting 
Thermostat Mode explain the use of the thermostat mode commands. 

# 

9 

9