Frigidaire 318204125 ユーザーズマニュアル

1. Press 

 for 6 seconds. 0° will appear in the display (Figure 1).

2. To increase the temperature use the number pads to enter the

desired change.  (Example 30°F)  

 

 (Figure 2).  The

temperature may be increased by as much as 35°F (19°C).

3. Press 

 to accept the temperature change and the display

will return to the time of day (Figure 3). Press 

 to reject the

change if necessary.

1. Press 

 for 6 seconds. 0° will appear in the display (Figure 4).

2. To decrease the temperature use the number pads to enter the

desired change.  (Example -30°F) 

 

  and then press

 (Figure 5).  The temperature may be decreased by as

much as 35°F (19°C).

3. Press 

 to accept the temperature change and the display

will return to the time of day (Figure 6). Press 

 to reject the

change if necessary.

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature or the
Broil temperature .

The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is cooking too hot or
too cool for the temperature you select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results
should help you to decide how much of an adjustment is needed.

 

 or

 

 or

This function allows you to reset the user defined settings back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or 12 Hour Energy Saving mode, Silent Control Operation or
Normal Sounds, Fahrenheit or Celsius Temperature Display, Oven Temperature Adjustment (set back to 0).

1. Press and hold 

 until the first single beep sounds (about 6 seconds)

2. After the first beep, press 

 pad once. All the setting are now set to the original factory default.