eutech-instruments cyberscan con 10 conductivitytds meter ユーザーズマニュアル

9

The CyberScan Conductivity CON 200 meter provides an RS 232C output for you to transmit

the reading either to a printer or a computer. This is extremely useful in instances where the

meter is used for continuous monitoring of a certain process or experiment. The data output to

the printer or computer can be then evaluated.

The data is output in the ASCII format. This format allows the data to be imported by a wide

variety of software that read ASCII data (e.g. LOTUS 123 C, Microsoft  Excel, etc.).

Eutech Instruments also provides software that can capture the data transmitted into an ASCII

file for later use.

a)  Open the communication port cover located at the bottom of the meter as shown in

Figure 10. Do not use excessive force when doing this.

b) 

Noting the orientation of the RS 232C connector, plug the RS 232C male connector into

the RS 232C port of the meter.

c) 

Fasten the connector by fastening the two screws at the side of the male connector.