jazzmutant lemur ユーザーズマニュアル

• To check if you’ve successfully connected your Lemur to your computer or a router,

check the Media display near the bottom of the screen. If connected, it will report the
speed of the connection (in the screen shown, it is 10 Megabits per second). If there is
a problem, the Media will be displayed as Disconnected.

• To use a fixed IP address to the Lemur (useful when you are connecting directly to the

computer), touch the words Static IP. To use DHCP to assign the IP address
automatically (best when using a router), touch Automatic using DHCP.

The current IP address is displayed to the right of the word IP. If DHCP is assigned and
the unit is trying to find a DHCP server, the words Seeking DHCP will be displayed (as
shown below).

It is useful to keep the Lemur Settings Window open while configuring and
troubleshooting your network connection.

Connecting a Lemur Directly to Your Computer

First, we’ll configure the Lemur to use a fixed IP address. The instructions for doing this
will be the same whether you’re using a Mac or a Windows machine.

• Turn on your Lemur and connect the Ethernet cable supplied with your Lemur to the

Ethernet jack on the back of the unit. Then connect the other end of the cable to your
computer’s Ethernet jack.

• Check the Settings Window on the Lemur. If your computer is turned on and

connected, the Media display should report the connection speed. If it says
Disconnected, make sure your computer is turned on, then check the cable and
connections.

• We’ll configure the Lemur to use a fixed IP address. Touch the words Static IP and

touch the Apply button at the bottom of the screen.

• Next, drag your finger over the IP address value. Use the “keypad” at the right of the

screen to enter an IP address. If you don’t need to use a particular address, use
169.254.0.2.

• Ensure that the NetMask is 255.255.255.0 (touch the NetMask value and use the

keypad if it’s necessary to change the current value).

• For Gateway, enter 0.0.0.0.