husky-liners 2315fr ユーザーズマニュアル

2315FR~1.DOC

Rev: 0

01/31/01

CARE AND USE INSTRUCTIONS

      

Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely

unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle

with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder

climates this “relaxing” may take longer; moving the liner inside will speed up the process.

     Your liner is manufactured using an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use

of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liner slick.

INSTALLATION INSTRUCTIONS FOR YOUR FORD

ESCAPE/MAZDA TRIBUTE CARGO LINER

IF YOUR FORD ESCAPE/MAZDA TRIBUTE COMES EQUIPPED WITH THE FACTORY SIX DISC
IN-DASH CD PLAYER, IT HAS A SUBWOOFER MOUNTED IN THE LOWER LEFT HAND SIDE OF
THE CARGO AREA. YOUR CARGO LINER CAN EASILY BE TRIMMED TO ACCOMMODATE
THIS FEATURE. TO TRIM, CUT ALONG THE OUTER EDGE OF THE MOLDED STEP AND ALONG
THE EDGE OF THE TREAD ON THE RAISED PORTION OF THE LINER. THIS WILL LEAVE A _”
LIP ALONG THE TRIMMED EDGE (SEE ABOVE). PHOTOS OF THE TRIMMED PART ARE
INCLUDED ON THE BACK OF THIS INSTRUCTION SHEET.

TO ACCESS THE FACTORY CARGO TIE-DOWN
HOOKS WITH YOUR LINER IN PLACE, MAKE
A VERTICAL SLIT ACROSS THE TOP OF THE
FOUR (4) RAISED AREAS SHOWN HERE
CIRCLED. THEN PUSH/PULL THE HOOKS UP
THROUGH THE LINER.