husky-liners 6192 ユーザーズマニュアル
6192 front and back.doc
09/20/00
THANK YOU FOR SELECTING A HUSKY FLOOR LINER
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
or Glass Plus
®
work well. Use of
Armor All
®
, Son-of-a-Gun
®
or similar items is discouraged as these products make the liners slick.
INSTALLATION INSTRUCTIONS FOR YOUR CHEVROLET
IMPALA/PONTIAC GRAND PRIX SECOND SEAT FLOOR LINER
LEFT OR
DRIVER’S SIDE
RIGHT OR
PASSENGER’S SIDE
FRONT OF VEHICLE
NOTICE: LEFT LINER
OVERLAPS RIGHT LINER
OVERLAPS RIGHT LINER
SOME PONITAC GRAND PRIX’S HAVE A CENTER CONSOLE
THAT WILL INTERFERE WITH THE PORTION OF THE LINER
DESIGNED TO COVER THE VEHICLE’S “HUMP” AREA. THIS
PORTION CAN BE EASILY TRIMMED AWAY USING A
UTILITY KNIFE OR HEAVY SHEARS. TRIM ALONG THE STEP
MOLDED INTO THE DRIVER’S SIDE “HUMP” WALL LEAVING
THE TOP OF THE STEP AS A “LIP.” SEE DIAGRAM AT RIGHT.
PHOTOS OF A TRIMMED PART ARE ON SHOWN ON THE
BACK OF THIS INSTRUCTION SHEET.
THAT WILL INTERFERE WITH THE PORTION OF THE LINER
DESIGNED TO COVER THE VEHICLE’S “HUMP” AREA. THIS
PORTION CAN BE EASILY TRIMMED AWAY USING A
UTILITY KNIFE OR HEAVY SHEARS. TRIM ALONG THE STEP
MOLDED INTO THE DRIVER’S SIDE “HUMP” WALL LEAVING
THE TOP OF THE STEP AS A “LIP.” SEE DIAGRAM AT RIGHT.
PHOTOS OF A TRIMMED PART ARE ON SHOWN ON THE
BACK OF THIS INSTRUCTION SHEET.