Trendnet CAMWMPN07 ユーザーズマニュアル
2.6 Requirements of Reliability, Maintainability and Quality
2.7 Environmental Requirements
2.4 Mechanical Requirements
2.5 Compatibility Requirements
This device passes the following compatibility requirements.
8
Feature
Detailed Description
2.3.3.2
WEP Management
Four WEP keys can be selected
STA with WEP off will never associate any AP with
STA with WEP off will never associate any AP with
WEP enabled
WEP Key Format: Option for Hex format
2.3.3.3
802.1x
Support EAP-TLS, EAP-TTLS, and EAP-PEAP
2.3.3.4
WPA
Support WPA-PSK and WPA-EAP Support Cipher
Mode AES and TKIP
Feature
Detailed Description
2.4.1
Length
50.8mm
2.4.2
Width
59.59mm
2.4.3
Height
0.99mm
Feature
Detailed Description
2.6.1
MTBF
Mean Time Between Failure > 30,000 hours
2.6.2
Maintainability
There is no scheduled preventive maintenance required
2.6.3
Quality
The product quality is followed-up by ALPHA factory
quality control system
Feature
Detailed Description
2.7.1
Operating
Temperature
Conditions
Temperature
Conditions
The product is capable of continuous reliable operation
when operating in ambient temperature of 0 ℃ to +55℃.
2.7.2
Non-Operating
Temperature
Conditions
Temperature
Conditions
Neither subassemblies is damaged nor the operational
performance is degraded when restored to the operating
temperature after exposing to storage temperature in the range
of –20 ℃ to +75 ℃.
temperature after exposing to storage temperature in the range
of –20 ℃ to +75 ℃.
2.7.3
Operating Humidity
conditions
conditions
The product is capable of continuous reliable operation
when subjected to relative humidity in the range of 10% and
90% non-condensing.
90% non-condensing.
2.7.4
Non-Operating
Humidity
Conditions
Humidity
Conditions
The product is not damaged nor the performance is
degraded after exposure to relative humidity ranging from 5%
to 95% non-condensing
to 95% non-condensing
Feature
Detailed Description
2.5.1
Wi-Fi
Meet Wi-Fi certification for IEEE 802.11 product
2.5.2
WHQL
Meet applicable WHQL certification requirements
2.5.3
Physical Layer and
Functionality
Functionality
Meet ALPHA Engineering Test Plan and Test Report