Homewerks Worldwide LLC 7130-06-BTN ユーザーズマニュアル
Green Wall switch
ASSEMBLY INSTRUCTIONS
7. Secure the suspension bracket I (C) to fan
housing using screw (CC) (included).
Secure suspension brackets (D & E) with
screws (BB) (included).
Secure suspension brackets (D & E) with
screws (BB) (included).
7
8. Remove junction box cover. As shown in wiring
diagram on page 5, using quick connect ports
8
Wall
switch
switch
NIGHT LIGHT
wire back view
connect house wires to switch and fan.
Note: Do not use metal wall plate with the
switch, as it may cause interference with the
fan operation.
switch, as it may cause interference with the
fan operation.
9. Connect a 4 in. circular duct and vent to the
9
Black
wire
Black
wire
outside. Secure it with duct tape or clamp
(not supplied).
(not supplied).
Turn on power source. Test the fan.
BLUETOOTH
®
SPEAKER FAN GRILLE INSTALLATION
Housing must be installed flush with ceiling board or the grille mounting spring will not be long
enough to insert into the slots inside the fan housing.
enough to insert into the slots inside the fan housing.
1. Join the connectors for the BLUETOOTH
®
speaker (black wires), light (white wires), and
RF receiver (gray wires).
RF receiver (gray wires).
www.homewerksww.com
9
1