Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
SIP-DECT OM System Manual
12
1 Power 48V DC (optional)
2 1GBit Ethernet (PoE)
3 USB
4 DECT antenna connector (RFP 37 IP)
5 Antennas (RFP 37 IP)
2 1GBit Ethernet (PoE)
3 USB
4 DECT antenna connector (RFP 37 IP)
5 Antennas (RFP 37 IP)
The hardware of all the new RFPs complies with the different regulatory domains. There are no specific
hardware variants required to use specific frequency bands and field strengths. Transmit Power,
frequency band and carrier frequencies are controlled by software.
hardware variants required to use specific frequency bands and field strengths. Transmit Power,
frequency band and carrier frequencies are controlled by software.
Other differences compared to the previous RFP family (RFP 32/34 IP and RFP 42 WLAN):
•
boots from internal flash memory instead of net-boot (SIP-DECT software is already on board)
•
software update via TFTP, FTP(S), HTTP(S), SFTP supported
•
supports 1GBit Ethernet
•
supports CAT-iq 1.0 level high definition voice for the Mitel 650 DECT phone
•
hardware can support Secure SIP and SRTP (with SIP-DECT 5.0 or later)
•
uses an external 48V DC Power Supply (if no PoE available) which meets the latest environmental
requirements (RFP 37: PoE only)
•
RFP 43 WLAN supports the 802.11a/b/g/n standards
•
any 3G RFP can host the OMM.
•
indoor RFPs have a USB 2.0 interface to connect external hardware for future applications (e.g.,
video camera).
1.2.1.2 Older RFP Types
Older RFP models supported by the SIP-DECT solution include
Older RFP models supported by the SIP-DECT solution include
•
RFP 32 IP
DECT RFP as indoor model
•
RFP 34 IP
DECT RFP as outdoor model
•
RFP 42 WLAN
DECT RFP + WLAN Access Point as indoor model