Mitel Deutschland GmbH 68635RFP36U-01 ユーザーズマニュアル
OMM Web Service
93
On each DECT phone, the administrator or user must subscribe to the SIP-DECT system through the
System -> Subscriptions menu. The specific PARK code for the SIP-DECT system should be entered
to subscribe to the system.
System -> Subscriptions menu. The specific PARK code for the SIP-DECT system should be entered
to subscribe to the system.
Please note:
The PARK is displayed in the top-right corner of the
DECT Phones page.
Each SIP-DECT deployment has a unique PARK code.
If the administrator configured a global or device-specific DECT authentication code, the
administrator/user must enter in the code before the DECT phone subscribes to the system.
administrator/user must enter in the code before the DECT phone subscribes to the system.
For “wildcard subscription”, an additional ID may be configured (see sub section Wildcard Subscription).
5.7.3.1 Subscription with Configured IPEI
The DECT phone data to be assigned to the subscribing DECT phone are identified by the IPEI. The
identity of a DECT phone (IPEI) is already known by the system before the DECT phone attempts to
subscribe. Unknown DECT phones are not allowed to subscribe in this mode.
The DECT phone data to be assigned to the subscribing DECT phone are identified by the IPEI. The
identity of a DECT phone (IPEI) is already known by the system before the DECT phone attempts to
subscribe. Unknown DECT phones are not allowed to subscribe in this mode.
To enable subscriptions, click the
Start button under the section Subscription with configured IPEIs
caption on the
DECT Phones page.
The OMM allows a subscription of configured but not subscribed DECT phones during the next 24 hours.
The administrator must press the Subscribe button again to permit more DECT phones to subscribe to
the SIP-DECT system.
The administrator must press the Subscribe button again to permit more DECT phones to subscribe to
the SIP-DECT system.
Note: Older DECT phones may not offer the possibility to enter an
access code (AC). You should always subscribe these DECT
phones with configured IPEI to maintain security.
phones with configured IPEI to maintain security.
5.7.3.2 Wildcard Subscription
To minimize administration effort, subscription is also possible, if the IPEI is not configured. But because
of the loss of further security by IPEI check, this kind of subscription is only allowed within a short default
time interval of 2 minutes.
To minimize administration effort, subscription is also possible, if the IPEI is not configured. But because
of the loss of further security by IPEI check, this kind of subscription is only allowed within a short default
time interval of 2 minutes.
To enable subscriptions, press the
Start button of the section Wildcard subscription on the DECT
phones page. If necessary, increase the time interval (or refresh subscription permission in time).
The OMM will allow a wildcard subscription during the set time interval. In case of timeout the permission
is lost. Only subscription with IPEI remains allowed within the fixed limit of 24 hours.
The OMM will allow a wildcard subscription during the set time interval. In case of timeout the permission
is lost. Only subscription with IPEI remains allowed within the fixed limit of 24 hours.
To achieve a selection of data during subscription (e.g. the user name being assigned to the DECT
phone), the field “additional ID” can be set in OMM data. If the OMM receives a valid “additional ID”
during subscription, the referring data are assigned to the DECT phone.
phone), the field “additional ID” can be set in OMM data. If the OMM receives a valid “additional ID”
during subscription, the referring data are assigned to the DECT phone.
If the additional ID is requested for a data record, the DECT phone user must type it. “Additional ID” can
be set within the authentication code menu. Please type the R-Key and type the additional ID.
be set within the authentication code menu. Please type the R-Key and type the additional ID.
Please note:
The input of the additional ID is only possible with Mitel 142 and Mitel 600
DECT phones. The value is not supported on third party GAP phones. If GAP phones are
going to subscribe wildcard, the first free DECT phone data record without any additional
ID will be assigned.
going to subscribe wildcard, the first free DECT phone data record without any additional
ID will be assigned.