Contec DS110-APL ユーザーズマニュアル
Settings
FX-DS110-APL
25
Configuration
On the main menu, click the [Configuration] key to open the
following dialog box. This allows you to view or enter settings for
the selected device. The dialog box contains IP parameter settings
including IP address, subnet mask, etc., wireless parameter settings
including operating mode, unit type, ESS ID, etc., as well as SNMP
and spanning tree settings.
following dialog box. This allows you to view or enter settings for
the selected device. The dialog box contains IP parameter settings
including IP address, subnet mask, etc., wireless parameter settings
including operating mode, unit type, ESS ID, etc., as well as SNMP
and spanning tree settings.
The Base tab has settings shared by all operating modes. These
settings are required. The SNMP tab has settings that are needed
when using SNMP agent functions.
settings are required. The SNMP tab has settings that are needed
when using SNMP agent functions.
The Spanning Tree tab is valid only when the Network Mode
setting is 'ADHOC (Simple Mode)' in the Base tab.
setting is 'ADHOC (Simple Mode)' in the Base tab.
Click the [Exit] key to return to the main menu.
To enable the APL setting, reboot the unit.
Figure 5.3. Configuration