Mobile Action Technology Inc. 12820R1 ユーザーズマニュアル
Heart Rate Monitor
Note: This is an accessory available for purhcase optionally.
1. Electrodes
2. Fastening buttons
2. Fastening buttons
How to wear the Heart Rate Monitor
1. Wet the electrodes as shown above.
2. Fasten up with the clips on both ends. Adjust the strap to assure it's not too tight or loose, so as to detect
2. Fasten up with the clips on both ends. Adjust the strap to assure it's not too tight or loose, so as to detect
accurate heart rate data.
3. Wear it slightly below your chest. Adjust the sensor position to the center of your body, while electrodes must
be pressed against your skin.
Note:
- Before washing the device, detach the main part of Heart Rate Monitor where electrodes are located. This part is not washable.
- Before washing the device, detach the main part of Heart Rate Monitor where electrodes are located. This part is not washable.
-
: While washing the straps, make sure water is no higher than 30°C.
-
: Ironing, bleaching or heating is prohibited.
How to assemble and change battery
1.
2.
3.
Page 1 of 2
Heart Rate Monitor Overview
2012/10/13
mk:@MSITStore:C:\Documents%20and%20Settings\Paul1106\桌面\Travel%20&%2...