Mobilicom ltd. MCU-30 ユーザーズマニュアル
MCU-30 User Manual
Page : 35 / 51
This page contains information which is protected by copyright and is proprietary to Mobilicom Ltd.
No part of this document
may be used, copied, disclosed or conveyed to another party without prior written consent of Mobilicom Ltd
Figure 18: MC-EMA-MPTMP connect to screen
5.
From the MC-EMA main menu (left side of the screen) go to network
configuration screen and configure:
a. Network Frequency
b. TX Power
c. Number of Hops and Max Retransmission (should be equal)
d. Transmission Vector (bandwidth allocation)
e. Profile
b. TX Power
c. Number of Hops and Max Retransmission (should be equal)
d. Transmission Vector (bandwidth allocation)
e. Profile
6. Click Verify and chose the unit ID from the dropdown list.
Figure 19: MC-EMA-MPTMP configuration validation
7.
Click “configure unit” the configuration is now downloaded to the MCU.
8. The MCU reboots with the new configuration and unit ID number.
9. Repeat stages 1-10 with the other units in the network.
9. Repeat stages 1-10 with the other units in the network.