Mobilicom ltd. MSH-10 ユーザーズマニュアル
User Manual
Page : 21 / 31
7.2 SkyHopper Pro LED indicator
By following the LED on the unit, the power and link status can be monitored. It is described as
follows:
follows:
1) ACTV LED:
a) Off – Power Down
b) On - Booting Up
c) Slow Blinking – Remote unit is transmitting, controller unit receiving (P2P search)
d) Fast Blinking – Air Link is up
2) DATA LED
a) Off – No Ethernet detected
b) On – Ethernet Cable is connected to a working device on host – No Data
c) Slow Blink – Error (synced to ACTV LED)
d) Fast Blink – Tx & Rx Air Traffic active
Should there be an error in your SkyHopper Pro unit, both the ACTV and DATA LEDs will be
simultaneously slow blinking.
simultaneously slow blinking.
Link status, CINR, RSSI, throughput and unit log information is available in the Web GUI, which can be
found online at www.skyhopper.biz/prosupport.
found online at www.skyhopper.biz/prosupport.