Melard Technologies Inc SA824894NE ユーザーズマニュアル
6 Power for the Sidearm
User’s Guide
Sidearm All-Terrain Handheld PC™
Installing the main battery
1. Slide the battery into the battery slot on the right side of
the Sidearm as shown below.
2. Insert the rubber battery door and turn the lock tab to the
locked position.
Tip: If this is the first time you are using this battery,
charge it (see “Charging the battery,” later in this
chapter.
charge it (see “Charging the battery,” later in this
chapter.
Determining main battery condition
To check the main battery’s condition:
n
Open the Control Panel (
Start / Settings / Control
Panel
) and double-tap the power icon.
Low power management
The Sidearm automatically turns off if the main battery
becomes too weak to power the unit. When this happens,
recharge the main battery or replace it with a charged
battery (see next section).
CAUTION: If the main battery is removed for an
extended period, or if the main battery is installed but
remains depleted for an extended period, all data in
memory will be lost. For this reason, it’s a good idea to
keep a charged main battery in the unit at all times.
extended period, or if the main battery is installed but
remains depleted for an extended period, all data in
memory will be lost. For this reason, it’s a good idea to
keep a charged main battery in the unit at all times.