M P H Industries Inc SDRRK02 ユーザーズマニュアル

 

8 

 
These keys are flat membrane-type keys that are embossed around their edges to make them easy to 
identify by feel.   
 
Some of the keys have two colors of text identifying them.  The red text is the default function of 
the key; pressing the key by itself will cause it to perform this function.  The function in blue text is 
initiated by first pressing the blue “2ndF” key. 
 
Mov/Sta  – Toggles the radar between moving and stationary operating modes.  Stationary mode 

defaults to strongest target of either (same or opposite) direction. 

 
Test  –    Manually initiates a self-test of the radar.  The radar will momentarily light all of its 

displays and icons.  Then it will test itself at various speeds.  If no problems are found, the 
radar will return to its previous mode of operation.  If a problem is found, the radar will 
display “Err” in the target window and cease to measure speeds.   

 

The radar performs additional self-tests invisibly during normal operation (initiated 
automatically).  The radar  lights the  “OK” lamp on the display unit if no problems are 
detected and displays an error message and stops measuring speeds if a problem is found. 

 
Range – Displays the numerical range of the locked target vehicles when pressed. 
 
Pat Bl – When the radar is in Standby mode, pressing this button will cause the radar to blank the 

patrol speed display.  Pressing the button while the patrol speed display is blanked will 
cause the locked patrol speed to reappear. 

 
Low/Minus – Works with the menu button.  Causes the radar to initiate City mode operation, if no 

selection has been made.  Decreases the setting of the menu item, if a menu selection 
has been made. 

 
Menu  – Allows the selection of modes and settings that do not have individual buttons on the 

remote.  Is described further in the Menu section of this manual. 

 
High/Plus  – Works with the menu button.  Causes the radar to  initiate Highway mode, if no 

selection has been made.  Increases the setting of the menu item, if a menu selection has 
been made. 

 
2nd F  – Causes the  radar to select the blue second function of a key instead of the red primary 

function of the key.  “2nd” appears in the middle window when it is pressed.  Pressing this 
key a second time causes “2nd” to disappear and allows the radar to select the primary 
(red) function of a key. 

 
Backlt  – Manually causes the backlight of the remote control to turn on for 7 seconds.  Once 

activated, the backlight  remains on for 7 seconds after any button is pressed.

   

For wired 

remote control, Backlit toggles the backlight on and off.