Max-plus CO. LTD RF-01 ユーザーズマニュアル
Manual
ON/OFF: Power control key
LIGHT: Select the colot key.red or green
F: Flashing function key
T: Cancel the timing function key
2H: Time 2 hours
4H: Time 4 hours
6H: Time 6 hours
8H: Time 8 hours
Size: 85x37x16.5mm
1. Technical parameter of the remote control:
1.1 Working frequency: 433.92Mhz;
1.2 Transmit power:
1.3 Working voltage: 12V23A
1.4 Distance: 15m(free open area);
1.5 Standby current of the sender: 3uA;
3. Learning method:
3.1 Keep pressing the remote button(any of 1~8) want to learn, at the mean time, press the learn
button of the receiver, the led on the receiver will flash one time, means the code has been learnt
successfully. Now release the remote button to finish the learning.
2.2 One receiver will learn one button(any of 1~8) only, if learn more than one time, the last
learning is the valid one.
2.3 Remote button 1~8 can learn individually with 8 different receivers, they will not affect each
other.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for comp
liance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection