Mesh Systems LLC DH001 ユーザーズマニュアル

 

 

 

P a g e

 | 10 

Version 1.0 

Identity Section 
Field Name 

Req 

Description 

 
 For snap trap devices, an ActiveSense snap foot is available.  
Contact your ActiveSense Specialist for details.

  

Default Exterior Device Type 

Y 

Associates a default exterior device type for a site.  As sensors are 
installed on location, the default sensor configuration for the 
device type will be applied.  If multiple exterior device types exist, 
these may be overridden at installation time (to fit the exact device 
type for which the sensor is placed).   
 
Should this sensor configuration require modification (e.g., sensor 
notifications and reports are inconsistent), contact your 
ActiveSense Specialist for re-configuration.   
 
 For snap trap devices, an ActiveSense snap foot is available.  
Contact your ActiveSense Specialist for details.

  

 

 

 

Step 3.3 

Click 

 to retain the site information.   

 Section 3: Installing Hardware 

Section 3.1:  Typical Coverage Expectations 

Section 3.1.1:  Physical Facility 

The ActiveSense Hub is expected to fully support an installed site having a total square footage of 
approximately 60,000 SQFT.  If additional sensor coverage is required, ActiveSense Range Extenders may 
be installed at an installation site, extending the Hub’s total site coverage area by approximately 30,000 
SQFT.  

Maximum ActiveSense Devices per installation site:  

 

1 Hub Device per site 

 

3 Range Extenders per hub 

 

Up to 80 rodent sensors per hub  

 Section 3.1.2:  Cellular Coverage 

ActiveSense components require Verizon cellular coverage in order to communicate sensor statistics. To 
verify Verizon coverage at the site location or area, visit the following web page: