Mesh Systems LLC DH001 ユーザーズマニュアル

 

 

 

P a g e

 | 27 

Version 1.0 

ActiveSense Decommissioning 

Section 4:  Un-installing (Decommission) Hardware 

This process requires access from the mobile device (sensor decommission) as well as from the web 
portal (site decommission) .     

Section 4.1:  Un-install (Decommission) a Sensor  

Decommissioning a sensor from an existing hub places the sensor into airplane mode,  which extends 
the battery life of the sensor.   

Step 1:  Place the ActiveSense Activator over the Activation Point as indicated for 10 seconds.  The green 
light will illuminate first; when the red light illuminates, the decommission is complete.  While 
uninstalled, both lights remain off.  

Figure 25: Sensor Decommission 

 

Step 2:  From the Web Portal, navigate to the Site>Sensor List.

. 

Step 3:  Select the proper Sensor and then select