Silex SX-560-2701-SP E1206 プリント
製品コード
E1206
SX5602701EN201004
silex technology is a registered trademark of silex technology, Inc. Other product or brand names may be registered trademarks or trademarks of their respective owners.
Technical information and specifications are subject to change wihout notice. ©2010 silex technology europe GmbH Alle Rechte vorbehalten.
Global Sales & Support Locations
USA (toll free) 866-765-8761
Europe Office
US Office
Germany (toll free) 0800-7453938
Headquarters Japan
+49 2151 650090
China Office
1 RESETI-
2 GPIO_0
3 GPIO_1
4 GPIO_2
5 GROUND
6 +3.3VDC
7 GPIO_3
8 GPIO_4
9 GPIO_5
10 GPIO_6
11 GPIO_7
12 GPIO_8
13 GPIO_9
14 TXD0
15 GPIO_10
16 CTS0-
17 GROUND
18 +3.3VDC
19 USB+
20 RTS0-
21 USB-
22 RXD0
23 +3.3VDC
24 GROUND
25 SPI_CS-
26 TXD1
27 SPI_CLK
28 CTS1-
29 GROUND
30 +3.3VDC
31 SPI_MOSI
32 RTS1-
33 SPI_MISO
34 RXD1
35 +3.3VDC
36 GROUND
37 IIC_SDC
38 TXD2
39 IIC_SDA
40 RXD2
OEM Module Diagram
OEM Interface
Pin Signal
Pin Signal
Specifications
Wireless Interface
802.11a/b/g (54Mbps/11Mbps)
Serial Ports
USB Ports
Console Port
General Purpose I/O Signals
Power
Environmental
VIEW FROM TOP
(All dimensions in mm)
24.0
3.0
VIEW FROM BOTTOM
(All dimensions in mm)
7.90
49.53
34.29
4.70
1.00
12.10
7.89
4.00
SX-560-2701
Low Power Consumption, Linux Programmable and Enterprise Security
The OEM interface allows OEMs to add functionality via a daughter-
card. Power is also input through this interface. This is a 40-pin 0.5-mm
pitch surface-mount header (Hirose DF12-40DS-0.5V or equivalent).
Pin assignments are shown below.
card. Power is also input through this interface. This is a 40-pin 0.5-mm
pitch surface-mount header (Hirose DF12-40DS-0.5V or equivalent).
Pin assignments are shown below.
2x UART with TXD, RXD, RTS, CTS
and upt to 921.6Kbps per port;
3 GPIOs are configurable as DTR,
DSR, and DCD on port 1
and upt to 921.6Kbps per port;
3 GPIOs are configurable as DTR,
DSR, and DCD on port 1
USB V1.1 host (12Mbps)
A dedicated UART console port
is available for configuration
is available for configuration
9 general purpose signals are
accessible via the OEM header
(external pull-ups required
for customization)
accessible via the OEM header
(external pull-ups required
for customization)
Power Consumption (3.3V +/-5%;
no load on
no load on
I/O ports or GPIOs)
Maximum: 460mA
Average: 240mA
Idle: 220mA
Minimum: 60mA (connected
to access point in powersave
mode; SX-560 will wake up
upon data received in UART
or other interrupt)
Average: 240mA
Idle: 220mA
Minimum: 60mA (connected
to access point in powersave
mode; SX-560 will wake up
upon data received in UART
or other interrupt)
Temperature
Operating Temperature:
0 to +70°C
Operating Temperature:
0 to +70°C
Storage Temperature:
-40 to +85°C
Maximum temperature change
per hour: 20°C
-40 to +85°C
Maximum temperature change
per hour: 20°C
Relative Humidity
Operating: 20% to 80%
non-condensing
Storage: 10% to 90%
non-condensing
Operating: 20% to 80%
non-condensing
Storage: 10% to 90%
non-condensing
Altitude
Operating 3.1km
Storage 9km
Operating 3.1km
Storage 9km
Standards Compliance
RS-232, RFC 2217
IEEE 802.11a/b/g
RoHS
RS-232, RFC 2217
IEEE 802.11a/b/g
RoHS
Designed for compliance with
EMC:
FCC, CE, VCCI, EN60601 Class B
Wireless:
FCC, CE, TELEC
EMC:
FCC, CE, VCCI, EN60601 Class B
Wireless:
FCC, CE, TELEC