Philips 4000 series LED TV 32PFL4907 32PFL4907/F7 ユーザーズマニュアル

English

38

Preferences

You can set the unit to reduce the power consumption or adjust the 

backlight brightness in Location setting. 

EasyLink allows you to operate your connected EasyLink device.

Setting your location to home

Choosing Home gives you full flexibility to change predefined settings 

for picture and sound.

1

  Use ▲▼ to select Preferences, then press OK.

2

  Use ▲▼ to select Location, then press OK.

Language

Location

Retail store

Channels

EasyLink

Home

Preferences

Network
Reset AV settings

3

  Use ▲▼ to select Home, then press OK.

Retail store

The unit will be set up with predefined settings for 

retail displays. In this setting, the power consumption 

may possibly exceed the limit requirement of the 

ENERGY STAR

®

 qualification.

Home

This setting is ENERGY STAR

®

 qualified.

The unit is set to maximize the energy efficiency 

for home setting and it can be adjusted through a 

choice of picture and sound quality according to your 

preference.

Note

 

• You must set Home. Otherwise, personalized picture and sound settings will not be 

memorized after the unit goes into Standby mode.

 

• If you select Home, E-sticker will not be displayed. 

E-sticker

When you set Location to Retail store, E-sticker (Electronic Sticker) is 

displayed. E-sticker can be Turned Off using procedure below.

1

  Use ▲▼ to select Preferences, then press OK.

2

  Use ▲▼ to select E-sticker, then press OK.

3

  Use ▲▼ to select Off, then press OK.

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and 

one-touch Standby between EasyLink-compliant devices. Compliant 

devices must be connected via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, 

you can control your TV and the devices with one remote control. For 

example, when you press ►(play) on your DVD remote control, your 

TV automatically switches to the correct channel to show the DVD 

content.

One-touch Standby

When you connect your TV to devices that support Standby, you can 

use your TV remote control to put your TV and all connected HDMI 

devices in Standby mode. You can perform one-touch Standby using the 

remote control from any of the connected HDMI devices.

System audio control

When you connect your TV to HDMI CEC compliant devices, your 

TV can switch automatically to play audio from the connected device. 

To use one-touch audio, you must map the audio input from the 

connected device to your TV. You can use the remote control from the 

connected device to adjust the volume.

Remote control (RC) key forwarding

RC key forwarding allows you to control EasyLink-compliant devices 

using your TV remote control. 

HDMI-ARC (Audio Return Channel)

HDMI-ARC allows you to use Philips EasyLink to output TV audio 

directly to a connected Audio device, without the need for an additional 

Digital Audio cable. Be sure that the device is HDMI CEC and ARC 

compliant, and that the TV is connected to the device using an HDMI 

cable attached to both HDMI-ARC connectors.

Note

 

• Philips does not guarantee 100% interoperability with all HDMI CEC devices.

 

• The EasyLink-compliant device must be Switched On and selected as the source.