Altronix AL1012ULM プリント
This multi-output access control power supply/charger is specifically designed
for use with access control systems and accessories. This unit convert a
115VAC / 60Hz input into five (5) individually protected Class 2 Rated power
limited 12VDC outputs (see specifications). Each output will route power to
a variety of access control hardware devices including Mag Locks, Electric
Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-
Safe and Fail-Secure modes. Controlled trigger input is achieved through nor-
mally open (N.O.) or normally closed (N.C.) supervised input or the polarity
reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output
relay enables HVAC Shutdown, Elevator Recall or may be used to trigger aux-
iliary devices.
for use with access control systems and accessories. This unit convert a
115VAC / 60Hz input into five (5) individually protected Class 2 Rated power
limited 12VDC outputs (see specifications). Each output will route power to
a variety of access control hardware devices including Mag Locks, Electric
Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-
Safe and Fail-Secure modes. Controlled trigger input is achieved through nor-
mally open (N.O.) or normally closed (N.C.) supervised input or the polarity
reversal from an FACP (Fire Alarm Control Panel). A form “C” dry output
relay enables HVAC Shutdown, Elevator Recall or may be used to trigger aux-
iliary devices.
• 12VDC output.
• 10 amp supply current.
• Five (5) individual Class 2 Rated power
limited outputs rated @ 2.5 amp.
• Current limit is 12VDC or 24VDC @ 2 amp
per output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Fire Alarm Panel or Access Control System trigger
inputs. N.O. or N.C. supervised trigger input and
polarity reversal trigger input.
• Output relay energizes when unit is triggered
(form “C” contact rated 1 amp @ 28VDC).
• Power fail supervision relay (form “C” contact rated
1 amp @ 28VDC).
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• 10 amp supply current.
• Five (5) individual Class 2 Rated power
limited outputs rated @ 2.5 amp.
• Current limit is 12VDC or 24VDC @ 2 amp
per output.
• Input 115VAC / 60Hz, 1.45 amp.
• Input fuse rated @ 3.5 amp/250V.
• Fire Alarm Panel or Access Control System trigger
inputs. N.O. or N.C. supervised trigger input and
polarity reversal trigger input.
• Output relay energizes when unit is triggered
(form “C” contact rated 1 amp @ 28VDC).
• Power fail supervision relay (form “C” contact rated
1 amp @ 28VDC).
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current .7 amp.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators
(power supply board).
• Red LEDs indicate condition of power outputs
(multi-output board).
• Power & input trigger LEDs (multi-output board).
• Enclosure:
- Combination knockouts re 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH
batteries.
• Product weight: 9.7 lbs.
• Shipping weight: 11.0 lbs.
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form “C” contacts).
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators
(power supply board).
• Red LEDs indicate condition of power outputs
(multi-output board).
• Power & input trigger LEDs (multi-output board).
• Enclosure:
- Combination knockouts re 1/2” and 3/4”
- Accommodates up to two (2) 12VDC/12AH
batteries.
• Product weight: 9.7 lbs.
• Shipping weight: 11.0 lbs.
AL1012ULM Multi-Output Access Control
Power Supply/Charger
Rev. DSAL1012ULM - E10L
Overview
Specifications
UL Listed for Access Control Systems Units
(UL 294).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
(UL 294).
UL Listed Standard for Safety for Fire
Protective Signaling Systems (UL 1481).
CUL Listed - CSA Standard C22.2
No.205-M1983 Signal Equipment.
No.205-M1983 Signal Equipment.
Agency Approvals