Altronix AL1012ULXPD16 プリント

• 12VDC outputs.
• 10 amp of continuous supply current.
• Sixteen (16) protected outputs.
• Input 115VAC / 60Hz, 1.9 amp.
• Input fuse rated @ 3.5 amp/250V.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid 

or gel type batteries.

• Maximum charge current .7 amp.

• Automatic switch over to stand-by battery when

AC fails (zero voltage drop).

• AC fail supervision (form "C" contacts). 
• Low battery supervision (form "C" contacts). 
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Enclosure:

- Combination knockouts are 1/2” and 3/4”
- Accommodates one (1) 12VDC/12AH battery.

Rev. DSAL1012ULXPD16 - B22F

• Fuse protected non-power limited 

outputs rated @ 3.5 amp each.

• Class 2 Rated PTC protected 

power limited outputs rated @ 2.5 
amp each.

• These multi-output power supply/chargers convert a 115VAC/60Hz input to 

sixteen (16) 12VDC outputs.

CUL Listed - CSA Standard C22.2 
No.205-M1983, Signal Equipment.

UL 294

UL Listed for Access Control 
System Units.