Saeco Super-automatic espresso machine HD8838/02 HD8838/02 ユーザーズマニュアル
製品コード
HD8838/02
• 6 •
• 6 •
• Remove the water tank from its place.
• Rinse and fi ll it with fresh water mak-
• Rinse and fi ll it with fresh water mak-
ing sure that it is not fi lled exceeding
the (MAX) level indicated in the tank.
Put the tank back in its place.
the (MAX) level indicated in the tank.
Put the tank back in its place.
Fill the tank only with fresh,
non-sparkling water. Hot wa-
non-sparkling water. Hot wa-
ter or any other liquid may damage
the tank and/or the machine. Do not
operate the machine if water is not
present: Make sure there is enough
water in the tank.
the tank and/or the machine. Do not
operate the machine if water is not
present: Make sure there is enough
water in the tank.
• Remove the coff ee bean hopper cover.
Note: The hopper may be pro-
vided with different safety
vided with different safety
features according to the regula-
tions of the country of use of the
machine.
tions of the country of use of the
machine.
• Slowly pour the coff ee beans into the
hopper.
Only coffee beans must be
put into the coff ee bean hop-
put into the coff ee bean hop-
per. Ground coff ee, instant coff ee or
any other object may damage the
machine.
any other object may damage the
machine.
• Replace the coff ee bean hopper cover.
• Insert the plug into the socket on the
back of the machine.
• Insert the plug of the other end of the
cable into a wall socket with suitable
power voltage.
power voltage.
Orange
Black
• Switch the power button to “I” to turn
the machine on.
• Make sure the selector switch is on “
” position; if necessary, turn it to the
indicated position.
indicated position.
• To turn the machine on simply press the
ON/OFF button.
• The display indicates that the machine
is priming the circuit.
Note: In some cases you may
be requested to manually
be requested to manually
prime the circuit. For this operation
see section “Control Panel Display”.
see section “Control Panel Display”.
• The display shows the ON/OFF icon.
Orange
This cycle allows rinsing the coff ee circuits
with fresh water.
with fresh water.
The cycle is carried out:
• At machine start (with cold boiler)
• After priming the circuit (with cold
• At machine start (with cold boiler)
• After priming the circuit (with cold
boiler)
• During the Stand-by preparation phase
(if a coff ee product has been brewed)
• During the turning off phase after
pressing the ON/OFF button (if a cof-
fee product has been brewed).
fee product has been brewed).
A small amount of water will be dis-
pensed to rinse and heat all the machine
components; in this phase this icon is
displayed.
pensed to rinse and heat all the machine
components; in this phase this icon is
displayed.
Wait for the cycle to fi nish automatically.
You can stop dispensing by pressing
either the coff ee button and/or the
ON/OFF button.
You can stop dispensing by pressing
either the coff ee button and/or the
ON/OFF button.
RINSE/SELFCLEANING CYCLE