TP-LINK TL-WN827N ユーザーズマニュアル

 

- 12 -

 

Figure 3-4 Edit a Profile-Auth.\Encry. 

¾ 

Authentication – You can choose the Authentication Type from the pull-down list with 

three options, Open System, Shared-Key System or LEAP. 

¾ 

802.1x – It enables when Authentication Type is setting to WPA. 

¾ 

Encryption – Displays which encryption type that the driver is using. When you select Open 

System, Shared-Key System as Network Authentication, there are two options: WEP and 

Disabled. If you select WPA-PSK  as  Network Authentication, there are TKIP and AES 

options instead of WEP and Disabled. 

¾ 

Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal 

digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits) 

encryption. You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F) or 13 

ASCII characters for 128-bit (also called 104bits) encryption. 

3.  To delete a profile: Highlight the desired profile name on Profile List, and click the Delete 

button. 

4.  To switch to another profile: Highlight the desired profile name on Profile List, and click 

the Activate button. 

Click the Network tab of the Utility and the Network screen with many available wireless network