Honeywell THX9321 ユーザーズマニュアル
Operating Manual
34
69-2493EFS—01
In case of difficulty
If you have difficulty with your thermostat, please try the suggestions below. Most
problems can be corrected quickly and easily.
problems can be corrected quickly and easily.
Screen is
blank
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
Screen is
difficult to
read
• To change the screen brightness or color, see backlight options in the Preferences menu
(see page 21).
• At 2 am each day, Prestige thermostats change screen colors for an hour, to prevent burn-
in. Touch the screen at any time to restore pre-set screen colors.
Heating
or cooling
system does
not respond
• Press
SYSTEM
to set system to Heat. Make sure the temperature is set higher than the
Inside temperature.
• Press
SYSTEM
to set system to Cool. Make sure the temperature is set lower than the
Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If “Waiting For Equipment” is displayed, the compressor protection timer is on. Wait 5
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• If “Waiting For Equipment” is displayed, the compressor protection timer is on. Wait 5
minutes for the system to restart safely, without damaging the compressor.