Frigidaire FPGC3087MS ユーザーズマニュアル

BEFORE SETTING SURFACE CONTROLS

LOCATIONS OF THE GAS SURFACE

BURNERS

Your cooktop is equipped with gas surface burners with

different BTU ratings. The ability to heat food quicker and

in larger volumes increases as the burner size increases.

The small

•

SIMMER burner is best used for

simmering delicate sauces, etc. This burner is located

at the right rear burner position on the cooktop.

The

•

REGULAR burners can be used for most surface

cooking needs. These burners are located at the left

rear and left front positions.

The

•

POWER burner is best used when preparing

larger quantities of food and it quickly bring liquids

up to a rolling boil.

The large

•

POWERPLUS burner is best used for

bringing large quantities of liquid rapidly up to

temperature or when preparing larger quantities of

food.

Regardless of size, always select cookware that is suitable

for the amount and type of food being prepared. Select a

burner and fl ame size appropriate to the pan. Never allow

fl ames to extend beyond the outer edge of the pan.

Figure 1

PLACEMENT OF BURNER HEADS AND

CAPS

REG

ULA

To prevent fl are-ups and avoid creation of harmful by-

products, do not use the cooktop without all burner caps

properly installed to insure proper ignition and gas fl ame

size.
It is very important to be sure that all surface burner

caps and burner grates are properly installed and in the

correct locations BEFORE operating the cooktop burners.

Remember:

• Always keep surface burner caps in place whenever

using a surface burner.

• When placing the burner caps, be sure that all burner

caps are seated fi rmly and rest level on top of

burner heads.

• For proper fl ow of gas and ignition of burners DO NOT

allow spills, food, cleaning agents or any other material

to enter the gas orifi ce port opening.

Fig. 2

WER PL