Gamber-Johnson 7170-0144 プリント

ページ / 1
1
2
3
4
Solution Components:
1.  Vehicle Base 
(Item No. 7160-0055)
Vehicle Base is a no-drill solution 
and attaches to the passenger side 
seat studs.  Designed using heavy 
gauge steel for long-term durability.  
Vehicle Base works with both the 
Police Package and the Street Model.
2.  Lower Tube
(Item No. DS-LOWER-7)
The Lower Tube provides vertical 
clearance over the center console or 
the seat.
3.  Upper Pole
(Item No. 7160-0177)
Center Upper Pole allows for closer 
mounting to the dash and less stress 
on the vehicle mounting equipment 
as weight is centered on the pole.  
Wrench is needed for loosening, 
tightening or height adjustment.
4.  9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around 
360° with locking points every 15°.  
Slide Arm can extend out from 9” 
to 13” from center pole and locks 
automatically in the retracted 9” 
position. Motion Attachment has tilt 
capabilities up to 90° forward/30° 
back
 and can be swiveled up to 360°.
5.  Support Brace
(Item No. 7160-0230)
Support Brace provides additional 
mount system support in rugged 
driving conditions and increases 
mounting system rigidity. 
Rugged Dock
ing Sta
tions and 
V
ehicle Moun
ts
Pedestal System
This document, including images, may not be reproduced partly or 
fully without the expressed written consent of Gamber-Johnson’s 
Marketing Department. © Copyright  2013 Gamber-Johnson, LLC
Vehicle Solution Package:
Chevrolet Impala (2006-2013)
3001 Borham Ave, Stevens Point, WI  54481
Toll Free: 800-456-6868  Fax:  800-934-3577
Email:  gamberj@gamberjohnson.com
Website:  www.gamberjohnson.com
Item No. 7170-0144
Must order package as is.  There are no substitutions.
5