Philips docking station for iPod/iPhone DC295 DC295/05 ユーザーズマニュアル
製品コード
DC295/05
14 EN
6 Other features
Set the alarm timer
You can set two alarms at different time.
1
Ensure that you have set the clock correctly.
2
Press and hold AL 1 or AL 2.
»
The hour digits begin to blink, and you
can hear one beep.
»
[AL SET] flashes on the screen.
3
Press TUNING +/TUNING - repeatedly
to set the hour.
»
The minute digits begin to blink.
4
Press TUNING +/TUNING - repeatedly
to set the minute.
5
Press OK to confirm.
6
Repeat steps 4-5 to select whether to ring
alarm the whole week, on weekdays, or at
weekend.
7
Repeat steps 4-5 to select an alarm sound
source: dock, FM or buzzer.
8
Repeat steps 4-5 to set the alarm volume.
After alarm volume is set, the unit will exit alarm
setting, and you can hear two beeps.
Tip
•
If you set iPhone/iPod playlist as the sound source, you
must create a playlist in iTunes called “PHILIPS” and
import it to your iPhone/iPod.
•
If no playlist is created in the iPod/iPhone or there is
no song in the playlist, the unit will wake to songs in the
iPod/iPhone.
•
If you select dock as alarm sound source, when there is
no device docked, the alarm will automatically switch to
buzzer to ring the alarm.
•
If both alarms are set to the same time, only AL1 will
ring.
Activate and deactivate the alarm
timer
1
Press AL1/AL2 repeatedly to activate or
deactivate the timer.
»
If the timer is activated, [ AL 1] or [
AL2] is displayed.
»
If the timer is deactivated, [ AL1] or
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press REP ALM .
»
The alarm stops, and the alarm icon
flashes.
»
The alarm will resume ringing 9
minutes later.
Note
•
When using batteries to operate, alarms can only use
buzzer as sound source.
•
When using batteries to operate, you can only press
REP ALM to show time.
Stop alarm ring
1
When the alarm rings, press the
corresponding AL1 or AL2 .
»
The alarm stops but the alarm settings
remain.
Tip
•
If you do not stop the alarm, it will ring for 30 minutes.
•
When an alarm rings, it shall begin from a relative low
volume, and rise gradually to the highest alarm volume
in 90 seconds.
View the alarm settings
1
Press AL1 or AL2 .