Havis C-CB-LOCK プリント
C-CB-LOCK_INST_6-09.docx6-09
Installation Instructions
C-CB-LOCK
Lock Option For Combo Box Series
Warning: Please read all instructions prior to installation of the armrest lock.
TOOLS REQUIRED:
TOOLS REQUIRED:
Phillips Screw Driver
Adjustable Wrench
HARDWARE: (Supplied in Kit)
Qty. Description
Qty.
Description
1
Lock Assembly Kit
2
#8-32 PEM Studs
1
Lock Arm Bracket
2
#8-32 Hex Nuts
1
Lock Catch Bracket
INSTALLATION:
1. Remove Armrest Pad:
Remove the four screws that attach
the armrest pad, and set the pad
aside. Keep all of the hardware, as
the pad will need to be reattached
to complete installation.
aside. Keep all of the hardware, as
the pad will need to be reattached
to complete installation.
2. Attach Lock Catch Bracket to Inside of Armrest:
Place the two #8-32 PEM studs
through the two holes provided,
and hold in place. The two PEM
studs do not need to be crimped.
and hold in place. The two PEM
studs do not need to be crimped.
Place the Lock Catch Bracket onto
the two PEM studs in the
orientation shown, and secure with
two #8-32 hex nuts.
orientation shown, and secure with
two #8-32 hex nuts.
Remove
and save
these four
screws and
washers.
and save
these four
screws and
washers.
#8-32 hex
nuts
#8-32 PEM
studs
Lock catch
bracket
nuts
#8-32 PEM
studs
Lock catch
bracket