Tycon Systems TP-SW8 データシート
TP-SW8
TP-SW8 Spec Rev 8 8-Feb-13 Specifications Subject to Change Without Notice
Page 2
Specifications
System Ordering:
TP-SW8-D
8 Port 802.3af/at compliant PoE Switch (no power supply included
– requires 46-57V DC
power source)
TP-SW8-NC
8 Port 12V-57V passive PoE Switch (no power supply included)
For further information contact:
LED
STATUS
DESCRIPTION
Power
Green
LED ON if either power input (port 8
or wire terminal) has valid power
applied
or wire terminal) has valid power
applied
Red
LED ON if the following condition
happened.
*Power input under voltage (Vin<
12V)
*Wire Terminal Power input over
voltage (Vin>58V)
*PoE over current (>2A)
happened.
*Power input under voltage (Vin<
12V)
*Wire Terminal Power input over
voltage (Vin>58V)
*PoE over current (>2A)
Off
No power in DC input
TP-SW8-D / -NC
Ethernet Standard
IEEE802.3/IEEE802.3u (10 base-T/100base-T)
POE Standard (Port 1-8)
TP-SW8-D IEEE802.3af/at
TP-SW8-NC Passive POE 12-57VDC
Ports
1 data/PoE input and 7 data/PoE output
automatic crossover and polarity
Transmission Speed
100 Mbps(100base-T),10 Mbps(10base-T)
Auto-negotiation
Switch Technology
Store and Forward
Protocol
CSMA/CD
Flow Control
IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate
148800pps for 100base-T, 14880pps for 10base-T
Address Table
2K MAC, self-learning
Connections
Shielded RJ45
POE Port
Port 1-7, auto power management
Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
Maximum POE Power
Port 1-8, 2A Per Port
– NC Version
Port 1-8, 35W Per Port
– 802.3af/at Version
Secondary Wire Terminal Input Max 10A
POE Protection
Over Temperature, Over Current, Over/Under
Voltage
Data Surge Protection
IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
IEC61000-4-4 (EFT) 40A (5/50ns)
IEC61000-4-
5 (Lightning) 20A (8/20μs)
LED’s
Link (Green On, Yellow On)
Activity (Green Blinking, Yellow Blinking )
PoE Input Detect-4 pair (Yellow On)
PoE Input Detect-2 pair (Yellow Blinking)
Power On (Green On)
Power On Alarm (Red On)
Activity (Green Blinking, Yellow Blinking )
PoE Input Detect-4 pair (Yellow On)
PoE Input Detect-2 pair (Yellow Blinking)
Power On (Green On)
Power On Alarm (Red On)
DC Power Input
46V to 57V, 12V to 57V(-NC Version)
Dual DC Inputs, Reverse Polarity Protected.
Self Consumption
<1.5 Watts
Operating Temperature
-40 to +85°C (-40 to 185°F)
Operating Humidity
(RH)
5% - 90% (non condensing)
Storage Temperature
-55 to +105°C (-67 to +221°F)
Dimensions
(LxWxH)
159 x 116 x 40mm (6.3 x 4.6 x 1.6”)
Weight
0.45kg (1lb)
LED
STATUS
DESCRIPTION
P1~P8
Link/Act
Green
A network device is detected at
100Mbps, but no communication
activity is detected.
100Mbps, but no communication
activity is detected.
Green
Blinking
This port is transmitting to, or
receiving packet from another
device at 100Mbps.
receiving packet from another
device at 100Mbps.
Yellow
A network device is detected at
10Mbps, but no communication
activity is detected.
10Mbps, but no communication
activity is detected.
Yellow
Blinking
This port is transmitting to, or
receiving packet from another
device at 10Mbps.
receiving packet from another
device at 10Mbps.
Off
No device is detected.
LED
STATUS
DESCRIPTION
P1~P7
PoE PSE
Yellow
A valid Powered Device(PD) is
detected and delivering power on
this port.
detected and delivering power on
this port.
Off
No PD is detected on this port.
P8
PoE PD
Yellow
4 pairs power source received
Yellow
Blinking
2 pairs power source received
Off
No PoE power detected on this port
Notes:
All shipments F.O.B. Bluffdale, UT 84065
Tycon Power Systems PoE Switches carry a 1 year warranty
LED STATUS INDICATORS
14641 S 800 W Ste A
Bluffdale, UT 84065
PH: 801-432-0003
FAX: 801-618-4220
Bluffdale, UT 84065
PH: 801-432-0003
FAX: 801-618-4220