Philips Micro music system DCM2060 DCM2060/79 ユーザーズマニュアル
製品コード
DCM2060/79
15
EN
To activate or deactivate the alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
»
appears when the timer is activated.
Tip
•
If CD/USB/iPod source is selected, while the audio
cannot be played, the unit switches to the tuner source
automatically.
Set the sleep timer
Note
•
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
minutes).
»
When sleep timer is activated, is displayed.
To deactivate the sleep timer
Press SLEEP repeatedly until [OFF] (off) is displayed.
Listen through the headphone
Plug a headphone into the socket on the unit.
Play from external audio
device
With this unit, you can play audio from an
external audio device like MP3 player.
1
Connect the supplied MP3 Link cable to
• the MP3-LINK socket.
• the audio output socket of an external
device.
2
Press USB/MP3 LINK repeatedly to select
MP3 link mode.
3
Start to play the external device (see the
device's user manual).
7 Product
information
Note
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
2 X 10 W RMS
Frequency Response
80 Hz - 16 kHz,
± 3 dB
Signal to Noise Ratio
≥60 dB
MP3 Link Input
0.5 V RMS 20 kohm
Disc
Laser Type
Semiconductor
Disc Diameter
12 cm/8 cm
Support Disc
CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC
24 Bits/44.1 kHz
Total Harmonic
Distortion
<1 5 % (1 kHz)
Frequency Response
60 Hz - 16 kHz
S/N Ratio
>55 dBA
Tuner (FM)
Tuning range
87.5 - 108 MHz
Tuning grid
50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
<43 dBf
DCM2060_79_UM_V1.0.indd 15
6/1/2012 10:53:58 AM