Brodit ProClip 530389 530389 プリント
製品コード
530389
Charging specifications item no 530389, 532389
Lithium charging is based on CVCC (Constant Voltage Constant Current). The charging procedure is as
follows:
follows:
If the battery is empty or has low charge a constant current charges the battery until the cell voltage
reaches 8,4V. The LED emits red light. Hereafter the charge continues until the current goes down to 0A.
The battery is now full and stays fully charged. A special designed voltage controller is monitoring that the
cell voltage is within limit. The LED emits green light.
reaches 8,4V. The LED emits red light. Hereafter the charge continues until the current goes down to 0A.
The battery is now full and stays fully charged. A special designed voltage controller is monitoring that the
cell voltage is within limit. The LED emits green light.
If the battery is used without disconnecting the charger, current is supplied directly resulting in a fast
recovery.
recovery.
Battery Chemistry
Li-ion or Li-Poly batteries
Compatible batteries
KAA0100
Input Voltage
11-30 V
Charging Voltage
12.6 V
Timer for Max. Charging Time
No, automatic
Max. Charging Time
0 minutes
Rapid Charge
1,0 A +/- 5%
Trickle Charge
0 to 50 mA
LED Charging Indicator
LED Red to Green indicator
Temperature Control
Controlled by battery
Operating Temperature
-40° C to + 50° C / -40° F to 122° F
(can be restricted by battery chemistry)
EMI/RFI
CE, E, FCC Part 15 Class B, ICES-003 Class B
Environmental RoHS
Compliant
Electrical Testing
ISO 7637 and SAE J1455
Input Transient Protected
Withstands +150V & -450V.
A 2,5A fuse is mounted on the incoming supply.
A 2,5A fuse is mounted on the incoming supply.
Output Short Circuit Protected
The charger will supply a maximum current of 1,0 A which protects
both the charger and the connected equipment. The current limit is
set to standards of the producer and shall not be higher.
both the charger and the connected equipment. The current limit is
set to standards of the producer and shall not be higher.