Motorola MBP28 B10700MBP28RU ユーザーズマニュアル

16

PARENT UNIT SETTINGS

When the sound alert is set 

, and the parent unit 

speaker volume is off, it will cause the parent unit to beep 
and flash "Sound alert from Baby Unit x" on the display, 
whenever the sound at the baby unit goes above a preset 
threshold.
1. Press 

1

 to access the main menu.

2. Press 

+

 or 

-

 to select 

.

3. Press 

1

 and 

+

 or 

-

 to turn on or off the sound 

alert.

4. Press 

1

 to confirm.

You can set the parent unit to give a warning when the 
battery is low and/or if the radio link to the camera unit is 
lost. When activated, an alert screen will be displayed on 
the parent unit with an alert tone emitted simultaneously.
1. Press 

1

 to access the main menu.

2. Press 

+

 or 

-

 to select 

.

3. Press 

1

 and 

+

 or 

-

 to select 

 or 

.

4. Press 

1

 and 

+

 or 

-

 to turn on or off the alert tone.

5. Press 

1

 to confirm.

NOTE
When LCD is off, any alert message will turn on the LCD.

The system supports up to four camera units. You can 
select any registered camera unit and view the picture 
from that camera.
1. Press 

1

 to access the main menu.

2. Press 

+

 or 

-

 to select 

.

3. Press 

1

 and 

+

 or 

-

 to select the desired baby 

unit or 

.

4. Press 

1

 to confirm. The parent unit will start to 

connect with the selected camera unit, while the other 
unit(s) will be in shutdown mode. The CAM x icon 
(e.g. 

) will be shown on the status bar, when 

displayed, where x is the baby unit number of the 
selected camera unit.

When 

 is selected, the screen of the parent 

unit will automatically switch between all the registered 
camera units, with each camera unit being selected in turn 
at about 30 second intervals.
NOTE
Only registered camera unit(s) will be shown in the 
selection list.