Motorola MBP28/2 B108MBP28/2RU ユーザーズマニュアル

製品コード
B108MBP28/2RU
ページ / 26
USING YOUR BABY MONITOR
13
ENGLISH
NOTE
If you place the parent and camera units too close 
together, you may hear a high pitched noise. This is not a 
fault. The units are designed to be operated at some 
distance apart, e.g. in separate rooms, so move the units 
further apart.
3.3
Adjust speaker volume of parent unit 
and camera unit
There are 5 volume levels on the camera unit, and 6 
levels on the parent unit, including 
VOLUME OFF
. The volume 
level of parent unit will be shown on the status bar when 
you adjust the volume. 
1. Press 
+
 or 
-
 on the parent unit or 
>
 or 
<
 on 
the camera unit to adjust the respective volume level.
2. The 
 will be displayed if the volume is turned off on 
the parent unit. 
An audible alert will emit when you reach the highest 
or lowest volume level.
Changing the volume setting on the camera unit affects 
the volume when you use the Talk Back feature and when 
playing a lullaby.
3.4
Talk Back
You can use the Talk Back feature to comfort and 
reassure your baby.
During Talk Back, you will not be able to hear your baby 
until you release 
7
.
1. Press and hold 
7
 on the parent unit to speak to your 
baby. Talk will be displayed on the parent unit.
2. Release the button to hear your baby again.
3.4.1
Adjust talk back volume
The camera unit has 5 volume levels from Level 1 to Level 5.
Press 
>
 or 
<
 on the camera unit to increase or 
decrease the volume respectively.
NOTE
If a lullaby is playing, it will stop during Talk Back, but will 
restart from the beginning when the Talk Back ends.
3.5
Temperature
The camera unit constantly monitors the temperature in your 
baby's room and alerts you if it gets lower than 14ºC (or 
57ºF), by emitting a warning beep and showing the alert 
message "Too cold! from Baby Unit x" on the parent unit 
screen, or if it gets higher than 39ºC (or 102ºF), it will show 
"Too hot! from Baby Unit x". Although this is for reference 
only, and there may be a small difference between the baby 
monitor reading and the actual temperature, please check 
your baby immediately if such an alert message is triggered.