Brodit ProClip 854967 854967 プリント
製品コード
854967
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Press/hook the edge on the lower part of the ProClip into the seam under the panel
surrounding the radio. Note: you may have to slide the mount a little to the left/right for it to fit into the seam.
2. Push upward on the lower angled edge of the ProClip to further insert the edge into the seam while rotating the
ProClip upward. Using your forefingers, flex the upper angled edge into the seam between the stereo and the
surrounding panel frame. Press firmly forward on the upper part of the ProClip so the angled edge goes all the
way into the gap between the stereo and the surrounding panel frame.
3 and 4. The ProClip is in place.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Press/hook the edge on the lower part of the ProClip into the seam under the panel
surrounding the radio. Note: you may have to slide the mount a little to the left/right for it to fit into the seam.
2. Push upward on the lower angled edge of the ProClip to further insert the edge into the seam while rotating the
ProClip upward. Using your forefingers, flex the upper angled edge into the seam between the stereo and the
surrounding panel frame. Press firmly forward on the upper part of the ProClip so the angled edge goes all the
way into the gap between the stereo and the surrounding panel frame.
3 and 4. The ProClip is in place.
2 (2)