Brodit ProClip 804797 804797 プリント
製品コード
804797
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the A-Post trim and small glass window, to widen the gap. Peel off the
cover of adhesive tape on the ProClip.
2. Pull/flip the rubber sealant open on the A-Post. Place the ProClip right above the small oval part of the A-post
(see arrow in picture). Press the angled edge on the lower part of the ProClip into the gap and hook it around the
A-post.
3. Press firmly forward with your left hand on the bottom part of the ProClip and toward the left on the side of the
ProClip with your other hand. Press until you see, hear or feel the angled edge on the upper part of the ProClip
hook around the A-post panel edge by the glass. Pull out the gap opener.
4. The ProClip is in place.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the A-Post trim and small glass window, to widen the gap. Peel off the
cover of adhesive tape on the ProClip.
2. Pull/flip the rubber sealant open on the A-Post. Place the ProClip right above the small oval part of the A-post
(see arrow in picture). Press the angled edge on the lower part of the ProClip into the gap and hook it around the
A-post.
3. Press firmly forward with your left hand on the bottom part of the ProClip and toward the left on the side of the
ProClip with your other hand. Press until you see, hear or feel the angled edge on the upper part of the ProClip
hook around the A-post panel edge by the glass. Pull out the gap opener.
4. The ProClip is in place.
2 (2)