Brodit ProClip 654827 654827 プリント
製品コード
654827
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the padded part of the dashboard and the
frame surrounding the stereo, to widen the gap. Open the glove compartment door. Use the enclosed alcohol pad
to clean the area where the ProClip is to be installed. Peel off the adhesive tape cover on the ProClip.
2. Hook the angled edge on the left side of the ProClip around the sidewall edge.
3. Place your fingers on the left side of the ProClip and push firmly to the right, towards the stereo, so the angled
edge on the right side goes into the gap above the gap opener. Press firmly forward with you thumb to make sure
the angled edge goes all the way into the gap. Pull out the gap opener. Close the glove compartment door.
4. The ProClip is in place.
1. Press the thin end of the enclosed gap opener into the gap between the padded part of the dashboard and the
frame surrounding the stereo, to widen the gap. Open the glove compartment door. Use the enclosed alcohol pad
to clean the area where the ProClip is to be installed. Peel off the adhesive tape cover on the ProClip.
2. Hook the angled edge on the left side of the ProClip around the sidewall edge.
3. Place your fingers on the left side of the ProClip and push firmly to the right, towards the stereo, so the angled
edge on the right side goes into the gap above the gap opener. Press firmly forward with you thumb to make sure
the angled edge goes all the way into the gap. Pull out the gap opener. Close the glove compartment door.
4. The ProClip is in place.
2 (2)