Brodit ProClip 654834 654834 プリント
製品コード
654834
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the seam/gap in the front side of the center console pillar,
to widen the gap. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the
adhesive tape cover on the ProClip.
2. Place the angled edge on the right side of the ProClip around the console pillar back edge.
3. Press firmly forward on the left front side of the ProClip so the angled edge on the left/front side flexes forward
and hooks into the seam/gap above the gap opener. Press the angled edge all the way into the gap. Pull out the
gap opener.
4. The ProClip is in place.
1. Press the thin end of the enclosed gap opener into the seam/gap in the front side of the center console pillar,
to widen the gap. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the
adhesive tape cover on the ProClip.
2. Place the angled edge on the right side of the ProClip around the console pillar back edge.
3. Press firmly forward on the left front side of the ProClip so the angled edge on the left/front side flexes forward
and hooks into the seam/gap above the gap opener. Press the angled edge all the way into the gap. Pull out the
gap opener.
4. The ProClip is in place.
2 (2)