Brodit ProClip 835024 835024 プリント

1.

2.

4.

3.

Please read all of the instructions and look at the pictures before installing the ProClip.  
   
1. Press the thin end of one of the enclosed gap openers into the gap between the trim and the padded console
part of the console, to widen the gap.  
   
2. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the cover of
adhesive tape on the ProClip. Press the angled edge on the lower part of the ProClip into the gap next to the gap
opener. Pull out the gap opener.  
   
3. On each side of the ProClip, press the thin end of each gap opener into the gap between the compartment
area sidewall and the padded console edge, to widen the gap. Press firmly forward on the left side of the ProClip
so it flexes to the right and the curved edge hooks into the gap between the gap openers. Pull out the gap
openers.  
   
4. The ProClip is in place.