Lecroy WAVEACE 2014 4-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2014 情報ガイド
![Lecroy](https://files.manualsbrain.com/attachments/a6b425870750fec538437b1ab439f821a77f2154/common/fit/150/50/ff6974cbc973bf6214b742b12b227276bf1659fd6b79979bcdabfd971209/brand_logo.gif)
製品コード
WaveAce 2014
Teledyne LeCroy
WaveAce Integration with LogicStudio
page
|
1 of 10
WaveAce Integration with LogicStudio
APPLICATION BRIEF
August 22, 2012
Summary
The WaveAce oscilloscopes
and LogicStudio logic-analyzer
module combine to form a
highly capable mixed-signal
instrument.
Introduction
Because almost all modern system designs combine both analog and
digital circuitry, debugging the design requires visibility into both analog
and digital signal paths, and, increasingly, serial-link circuitry. The basic
diagnostic tool of choice for the analog side is an oscilloscope, while digital
signals are often best observed with a logic analyzer. Thus, a well-rounded
test bench will carry both instruments. Unfortunately, logic analyzers are
often too slow, complicated, and costly. A mixed-signal oscilloscope is one
way to approach the issue, but another cost-effective approach is to
combine an oscilloscope with a logic-analyzer module. LeCroy’s WaveAce
oscilloscope and LogicStudio 16-channel logic analyzer combine with a
PC to form a mixed-signal instrument that addresses a wide range of
applications. LogicStudio supports both the WaveAce 1000 and 2000
series of oscilloscopes, as well as the WaveJet 300A series.