Intel Entry Server Board SE7210TP1 (SCSI) SE7210TP1SCSI ユーザーズマニュアル

製品コード
SE7210TP1SCSI
ページ / 6
All products, dates, and figures specified are preliminary based on current expectations, provided for planning purposes only, and are
subject to change without notice. Availability in different channels may vary.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED
IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY
OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT,
COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. 
Intel products are not intended for use in medical, life saving, or life sus-
taining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
Intel, the Intel logo, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries.   
*Other names and brands may be claimed as the property of others.
Copyright © 2004, Intel Corporation. 
Intel Literature Center:  1-800-548-4725 
0204/SJ&MM/DMW&LK/MD/PP/20K
ORDER NUMBER 253647-001
For the most current product information on Intel server
building blocks, visit: 
www.intel.com/go/serverbuilder
System BIOS
BIOS Type
8Mb Flash EEPROM with AMI* BIOS,
Multiboot BBS (BIOS Boot Specification) 
1.4–compliant 
Special Features
Serial console redirection, Plug and Play,
IDE drive autoconfigure, SMBIOS 2.3.1,
ECC/Parity support, multilingual support 
Jumpers and Front-Panel Connectors
Jumpers
BIOS configuration
Front-Panel Connectors SSI-compliant connector with power 
LED, NIC activity LEDs, power on/off 
switch, reset switch
Mechanical
Server Board Style
ATX
Server Board Size
12" x 9.6"
1U Platform Size
1.7" H x 16.9" W x 23" D
Power Requirements 
Power Supply
ATX 12V- or EPS 12V-capable
+5V
20.0A maximum continuous current
+5V Standby
2.0A minimum continuous current
+12V
18.0A maximum continuous current
+3.3V
24.0A maximum continuous current
–5V
0.00 A maximum continuous current
–12V
0.5A maximum continuous current
Environment
Ambient Temperature
3
Operating (system): 10°C to 35°C; 
non-operating/storage (system): –40°C 
to +70°C 
Relative Humidity
Non-operating: 95%, non-condensing
at 30°C
Processor
Intel
®
Pentium
®
4 processors with a system bus of up to 800 MHz
and featuring Hyper-Threading Technology
1
; for the latest processor
support information, visit
http://support.intel.com/support/
motherboards/server
System Memory
Memory Capacity
Four DIMM sockets for up to 4 GB of 
unbuffered ECC DDR PC2100/PC2700/ 
PC3200 memory 
Memory Type
Unbuffered ECC or Non-ECC DDR 
PC2100/PC2700/PC3200
2
SDRAM 72-bit,
184-pin gold-plated DIMMs
DIMM Sizes
128MB, 256MB, 512MB, 1GB 
Memory Voltage
2.5 V only
Error Detection
Corrects single-bit errors, detects double-
bit errors (using ECC memory)
Integrated On-Board
Chipset
Intel
®
E7210 chipset
Dual Network 
One Intel
®
PRO/1000 Server Network
Connections
Connection (Intel
®
82547EI Controller) 
and one Intel
®
PRO/100+ Server Network
Connection (Intel
®
82551QM Controller)
Optional Ultra320 SCSI  Adaptec* AIC-7901 Single-Channel SCSI
controller supporting mirroring and 
striping. Zero Channel RAID adapters are
also supported. (The option for integrated
Ultra320 SCSI is not available with Intel
®
Entry Platform SR1325TP1-E.)
Graphics
ATI* RAGE* XL SVGA PCI video controller 
with 8 MB of video memory
Super I/O Controller
Winbond W83627HF Super I/O controller 
Input/Output
CSA Port
Communication Streaming Architecture 
port providing a dedicated link to the Intel
PRO/1000 XT Server Network Connection
for rapid network communication
PCI
One 32-bit/33MHz PCI slot (not available
on Intel
®
Entry Server Platform 
SR1325TP1-E)
PCI-X
Three 64-bit/66MHz PCI-X slots (one 
available on Intel
®
Entry Server 
Platform SR1325TP1-E)
Serial ATA
Two ports supporting RAID levels 0 and 1
IDE
Two EIDE channels for a total of four IDE 
devices
USB
Three stacked USB connectors for a total
of three at the rear panel, one internal 
front-panel USB header to provide one 
USB port
Serial Ports
Two serial ports: one asynchronous 9-pin
RS-232C, one via 10-pin internal header
Floppy Controller 
1.44MB and 2.88MB, 3-mode support
Keyboard/Mouse 
PS/2, 8240A-compatible
Management Solution
3
Hardware
MINI BMC (NATIONAL PC87431MAT OR 
EQUIVALENT), AND HECETA* (ADM
1027) MANAGEMENT 
CON-
TROLLER
Software
Intel Server Management 5.8 (at 
product launch)
Remote Management  LAN access to system status, logs,
configuration data, and utilities, without 
the need for a remote-management card 
Server Monitoring
To monitor temperatures, voltages, and 
fans 
Server Troubleshooting Event filtering and proactive alerting via 
LAN
Validated Operating Systems
Microsoft* Windows* 2000 Server, Microsoft Windows Server*
2003, Red Hat* Linux* 9.0, Red Hat Enterprise Linux ES 3.0, SuSE
Linux 9.0 Professional 
Safety Compliance
Canada
UL/CSA 60950-1:2003 (UL Recognition 
Mark)
Europe
EN 60 950; CE Mark-EU Directive 
73/23/EEC
International
IEC 60 950
Nordics
EMKO-TSE (74-SEC) 207/94
Russia
GOST-R 50377-92 (GOST-R Mark)
United States 
UL/CSA 60950-1:2003 (UL Recognition 
Mark)
EMI Verification
Based on a board configured in a compatible
4
Intel host system
Australia/New Zealand Verified to AS/NZS 3548, Class A (C-tick 
Mark)
Canada
Verified to ICES-003, Class A
Europe
Verified to EN55022, Class A, EN55024 
(Immunity), and CE Mark (EU Directive 
89/336/EEC)
International/Japan
Verified to CISPR-22/VCCI, Class A
Korea 
RRL Class A Certification to MIC Notices 
1997-41 & 1997-42
Russia
Verified to GOST-R 29216-91, GOST-R 
50628-95 (GOST-R Mark)
Taiwan
Verified to BSMI CNS13438, Class A (DOC)
United States 
Verified to FCC, Class A
1
Hyper-Threading Technology (HT Technology): Using HT Technology with this product requires a Pentium 4 processor that supports this 
feature and an HT Technology-enabled chipset, BIOS and operating system. See 
http://support.intel.com/support/motherboards/server/
for more information, including details on which processors and operating systems support this feature.
2
DDR PC2100, PC2700, and PC3200 SDRAM modules are also often referred to as DDR266, DDR333, and DDR400 modules respectively.
3
Environmental ambient temperature is the system-intake measurement for an Intel
®
Entry Server Board SE7210TP1-E installed in an 
Intel
®
Entry Server Chassis SC5250-E.
4
Compatible host system denotes the system(s) with which Intel tested the board and found it compliant.
5
Products with codes ending in NA include a North American power cord.
Intel
®
Entry Server Board SE7210TP1-E and 
Intel
®
Entry Server Platform SR1325TP1-E Specifications
Item
Order Code
Intel
®
Entry Server Board SE7210TP1-E Options
With integrated SCSI
Without SCSI
1U integrated platform without SCSI
Intel
®
Server Chassis Options
Intel
®
Entry Server Chassis SR1325-E (1U)
Intel
®
Entry Server Chassis SC5250-E
Intel
®
Server Chassis SC5200 (base redundant power configuration)
Intel
®
Server Chassis Accessories
3rd Hard Drive Kit (for Server Chassis SR1325-E)
1U Rail Kit 
Slimline CD-ROM Drive 
Slimline Floppy Drive
Hot-Swap SATA Drive Upgrade (four bays for Server Chassis SC5250-E
and SC5200) 
5U Rack Kit (for Server Chassis SC5200 )
Abbreviated Configuration Guide
SE7210TP1SCSI
SE7210TP1
SR1325TP1NA
5
SR1325TP1
Included with 1U Platform
KPTBASE450BLK
KHD3RP450
ATPA3HDUPKIT
AXX1U2URAIL
AXXSCD
AXXSFLOPPY
ASATAHSDB
AHD2RACK 
D33025