Lecroy WaveJet 354A 500 MHz 4 Channel Oscilloscope WaveJet 354A データシート
製品コード
WaveJet 354A
WaveJet 300A Remote Control Manual
917976 Rev A
13
2.16 Response to the identification common query, *IDN?
See the list of commands.
2.17 Size of protected user data storage area if the *PUD command and *PUD? query are
implemented
implemented
Not implemented.
2.18 Size of resource description if the *RDT command or *RDT? query are implemented.
Not implemented.
2.19 States affected by *RST, *LRN?, *RCL, and *SAV
Table 2-8. List of states affected
Name State
*RST
Same as Recall Default Setup
*LRN
Not implemented
*RCL
Same as Recall Setup
*SAV
Same as Save Setup
2.20 Scope of self-test performed by the *TST? query
The Acquisition Memory test is conducted.
2.21 Additional status data structures used in the device’s status reporting
Status Byte Register
Table 2-9. Model of Status Byte Register
Bit Definition
Implemented?
7
Device-Defined Summary Message
No (always zero)
6
Master Summary Status
Yes
5
Standard Event Status Bit (ESB) Summary Message
Yes
4
MAV Queue Summary Message
Yes (only GPIB)
3
Device-Defined Summary Message
No (always zero)
2
Device-Defined Summary Message
No (always zero)
1
Device-Defined Summary Message
No (always zero)
0
Trigger Event Status Bit (TESB) Summary Message
Yes
Service Request Enable Register
An application programmer can select which summary messages in the Status Byte Register may cause
service requests.
service requests.