ABUS 2-Zone alarm system Conrad Alarm zones 2 Conrad データシート

• The alarm can be terminated at any time and the alarm system be disarmed by

setting the “mode selection switch” to “OFF”. The system can also be disarmed
by an external key switch.

☞

Perform the system test again to test the alarm zone 1 sensors.

The system status is displayed by the status LED “EXIT”.
An external status LED (see chapter “7.7 Connection of an External Status LED”)
can also be connected to the alarm system. The external status LED has an identi-
cal function to the status LED “EXIT”.

Off

System disarmed 

Only the function of the 
internal door bell is available. It can
be activated by the correspondingly
connected button.

This system status is present when
the “mode selection switch” is set to
“OFF”.

Flashing quickly

System armed 

The system is armed.

Flashes slowly

Entry or 

The entry or exit delay

exit delay

is currently active.

active

36