Smartwares 10.018.27 データシート

Package & Accessories

Included

Quantity

Mark

Remark

Indoor Monitor

1

A

Indoor monitor with LCD screen

Screw

4

B

Two pairs depending on thickness

of the door

Outdoor Camera

1

C

The ribbon cable will go  through

Peephole to connect Indoor Part

Steel Bracket

1

D

Use screw to fix the steel bracket 

with Outdoor part

User Manual

1

Door

D. Steel Bracket

A. Indoor monitor

B. Fixing screws

Ribbon cable

Drill Hole in door

C. Outdoor camera

You will need

Either remove your current door viewer or drill a new hole at least 

13mm diameter up to 20mm diameter Into your door in a suitable position 

to view the visitor.

Open the battery cover of the indoor monitor (A) and insert the Micro SD card.

Then insert 3x AA batteries making sure they are inserted correctly.

Taking extra care with the ribbon cable gently push the indoor monitor 

(A) back onto the steel bracket (D) and slide down to lock into position.

Insert your selected screws (B) according to your door thickness into 

the Outdoor camera (C) but do not fully tighten.

Push the door viewer (C) into position making sure the ribbon cable 

is pushed through first and the up arrow on the back of the camera 

is facing up.

Connect the ribbon cable by pushing it onto the connection, you will feel 

a “Click” as it locks onto the circuit board. Make sure the cable is fitted 

the correct way around as shown in the image. 

Using the steel bracket (D), make sure the up arrow is facing up and 

push the ribbon Cable through the slot. Then allow the screws to push 

through the holes so the steel bracket becomes flush with the door.

Tighten the screws to fix the steel bracket and Outdoor camera 

into position.

Clip the battery cover back on, the ribbon cable will fit in a small opening 

allowing it to come through the cover.

  Conforms to all relevant European Directives.

This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’. 

When this symbol is marked on a product or battery, it means that 

it should not be disposed of with your general household waste. 

Some chemicals contained within electrical/electronic products or 

batteries can be harmful to health and the environment. Only dispose 

of electrical/electronic/battery items in separate collection schemes, 

which cater for the recovery and recycling of materials contained within. 

Your co-operation is vital to ensure the success of these schemes and 

for the protection of the environment

Indoor-part Dimension: 136×75×18mm
Outdoor-part Dimension: 30×30×7mm
Door hole range: 13mm~20mm
Door thickness range: 35mm~105mm
Battery: 3x AA batteries (Not included

）

Battery life: 3 months (based on 10 operations per day)
Voltage: 4.5V~3.5V

We recommend that good quality, branded, alkaline batteries 

are used.
Do not leave the product on uneven or unstable surfaces to prevent 

damage caused by falling.
Try to avoid placing the product on high-temperature surfaces, 

high humidity or a lot of dust, salt spray and other harsh environments 

as this may reduce the lifespan of the product.
Take care with the ribbon cable on the door viewer to avoid damage.

Smartwares declares that the appliance, model [VD27], complies 

with the main essential requirements of the R&TTE directive, 

1999/5/CE. The complete declaration of conformity is available 

on request at: